For smaller Single PrintFrame setups with dimensions up to 2.50 meters in either height or width, no additional support braces are needed. For clean installation and easy removal, the frames are mounted on the wall using standard hook screws. The profile hooks directly onto the screws, allowing for easy installation, secure suspension, but above all, a seamlessly clean fit to the wall.

For larger frame sizes, exceeding 2.50 meters in height or width, the addition of vertical or horizontal support braces becomes necessary. Brace Profiles are placed every 2.20 meters to support and stabilize the frame. When Single PrintFrame setups exceed lengths of 6 meters, Brace Profiles need to be extended using Brace Joint Plates. This allows for the construction of much larger frames while maintaining the structural stability of the frame.

In cases where additional wall support is required, or hook screws are not an option, such as for larger frames, the frame can be screwed directly into the wall. This involves attaching the profile to the wall using screws through the frame, providing increased stability compared to hook-mounted systems. For installations where acoustic control is important, the frame can be outfitted with acoustic foam to improve sound absorption and reduce echo.